Для iPhone, iPad и IPod Touch так и не вышел. Пока пользователи могут довольствоваться лишь инструментом , который, кстати, имеет немало ограничений (поддерживает не все версии “яблочных устройств» и не все версии iOS 10). Однако в скором времени ситуация может кардинально измениться, и Yalu может стать бесполезным эксплоитом для джейлбрейк-сообщества.

Новый инструмент для jailbreak iOS 10.3 представит хакер из Китая, известный под ником 0xnever. В своем Твиттер-аккаунте он анонсировал новый эксплоит, указав на скорый его выход в свет. Примечательно, что он будет поддерживать все модели iPhone, iPad и iPod Touch без ограничений и даже прошивку iOS 10.3, которую сегодня пока не удалось взломать.

Разработчик также утверждает, что его эксплоит сможет в один клик изменить полупривязанный джейлбрейк iOS 10.х на непривязанный. Ему удалось найти нужные уязвимости и использовать их в своих целях. Чтобы не быть голословным, хакер опубликовал в сети два изображения, подтверждающих возможность сделать непривязанный джейлбрейк iOS 10.3. Скриншоты сделаны с iPhone 6s с iOS 10.3 на борту, на устройстве установлен магазин твиков Cydia версии 1.1.30.

Скачать jailbreak iOS 10.3

Как скоро инструмент появится в публичном доступе, пока не известно. Но хакер обещает выпустить его в самое ближайшее время. Надеемся, что его слова не окажутся пустыми. При первой возможности мы опубликуем на нашем ресурсе статью со ссылкой на непривязанный джейлбрейк iOS 10.3 и инструкцией для взлома.

After almost seven months of its release, iOS 10.3-10.3.3 firmware now has a jailbreak for 64-bit devices. Here’s how you can download and install g0blin jailbreak on your iPhone, iPad, and iPod touch.

Table of Contents

What is g0blin?

g0blin is an iOS 10.3-10.3.3 jailbreak for iPhone, iPad, and iPod touch devices with 64-bit chipsets. It is developed by the eminent developers Sticktron and Jake James.

It currently works on the following versions only -

10.3.1
10.3.2
10.3.3

g0blin utilizes Luca Todesco’s yalu102 KPP bypass and . This tool is a work in progress but you can use Cydia now as Jake added the “jailbreakd” daemon to this tool.

Cydia and Substrate are now working like they should. This tool doesn’t require a Substrate update.

Compatibility

Here’s the complete compatibility list of this tool with various firmware versions and devices.

iPhone

iPhone 5S (10.3-10.3.3)
iPhone 6/6 Plus (10.3-10.3.3)
iPhone 6S/6S Plus (10.3-10.3.3)
iPhone SE (10.3-10.3.3)

iPad

iPad Mini 3 (10.3-10.3.3)
iPad Mini 4 (10.3-10.3.3)
iPad Air 2 (10.3-10.3.3)
iPad Pro 12.9-inch 1st generation (10.3.3)

Incompatible devices

As of now, a few devices and firmware are not supported due to missing offsets. Once the developers add the necessary offsets, you will be able to use this tool. If you have an incompatible device or iOS version, just wait for an update.
Devices having a chipset different than A7-A9 are incompatible.
iPhone 7 and iPhone 7 plus are incompatible as yalu102’s KPP bypass doesn’t support them.
iPad Pro 12.9-inch 2nd generation, iPad Pro 10.5-inch, and iPad 5 are not supported.
iPhone 8/8+ and iPhone X are incompatible as they ship with iOS 11 only.

Future support

The developer will add support for these devices in the next version -

iPad Pro 12.9-inch 1st gen (10.3-10.3.2)
iPad Mini 2
iPad Pro 9.7-inch

Download g0blin jailbreak

RC 2 with Dropbear SSH client (unofficial file by arinc9)
RC2 (latest official IPA file)
RC1 (obsolete)
RC0 (obsolete)
IPA file (by xPeeks)
Version 3 (white screen error)
Version 2 (glitchy)
Version 1 (obsolete)

Updates

RC 2 with Dropbear SSH client released by arinc9. If you are on RC2, use the reinstall bootstrap with this version.
RC2 is out. It offers better compatibility and fixes respring panics and Cydia not showing on the home screen. You must install OpenSSH because Dropbear is no longer present in this update.
A new version by developer xPeeks is out. Apps such as Filza and MTerminal that require root access won’t work properly. It fixes the white screen glitch in Cydia.
Version 3 is out. It fixes the white screen glitch in Cydia.
Cydia doesn’t update the UI properly right now so wait for version 2.
Version 2 is out now.

Requirements

A compatible 64-bit iPhone, iPad, or iPod touch
iOS 10.3-10.3.3 firmware
A computer running Windows, macOS, or Linux
Cydia Impactor
Internet connection

How to jailbreak iOS 10.3-10.3.3 with g0blin

Step 1 Connect your iOS device to your computer.

Step 2 Start Cydia Impactor tool. If you don’t have it already, download it from this .

Step 3 Download the g0blin version 1 IPA file from the link above to your desktop.

Step 4 Drag this file onto Impactor’s window to start the sideloading process.

Step 5 Impactor will now ask you for your Apple ID details. Enter your email and password.

Step 6 Wait for it to complete the installation process. Once the sideload process is over, the app will appear on your home screen.

Step 7 Disconnect your device from the computer.

Step 8 Opening the app will result in the “Untrusted Developer certificate” error. Therefore, you must go to Settings > General > Profiles & Device Management and verify this app’s certificate first.

Step 9 Run the g0blin jailbreak application from your home screen. If it reboots your device or doesn’t work at the very first try, keep retrying for at least 10-15 times.

Step 10 Wait for it to inject the exploit onto your device. Once it’s done, it will display the following message.

Step 11 You can now run Cydia from your home screen.

v3 users

Remember, the app will alert you about when it’s safe to open Cydia. DO NOT respring via Cydia.
You must use the respring button in the g0blin jailbreak application to ensure tweaks and MobileSubstrate work properly (this applies only to v3 users).
If you are using version 3, constantly switch between Cydia and the jailbreak app in the app switcher. This will ensure Cydia works instead of showing a white screen.
As of now, applications that require root access such as Filza are not fully compatible. The upcoming versions will hopefully fix this issue.
If you are still using v3 or older versions, upgrade to the file by xPeeks.

xPeeks version users

You don’t need to respring.
Filza now works.
If you are getting a white screen in Cydia, simply press “i” icon at the top. Enable force-reinstall bootstrap and save. Run the jailbreak app again.

How to re-jailbreak your device after reboot

After each reboot, Cydia and all your tweaks will stop working. Therefore, you must re-jailbreak your device to make them work again.

Since a lot of users were asking about how to re-enable the jailbreak, here’s a step-by-step tutorial that lets you do just that.

Open the g0blin app.
Press the Jailbreak button.
Your tweaks will now start working again.
After every 7 days, you must sign the app with Cydia Impactor again by following the steps above. You can also use for on-device signing without a computer.

For more jailbreak tools and scene updates, give us a like on Facebook and Twitter.

У вас возникли какие-то проблемы, вы можете установить альтернативный джейлбрейк G0blin для iOS 10.3.x. Разработчик и хакер Sticktron недавно выпустил IPA-файл, с помощью которого установить джейлбрейк на устройство очень просто.

Перед тем как переходить к инструкции, вы должны знать следующую информацию.

Джейлбрейк G0blin поддерживает следующие версии iOS 10:
- iOS 10.3.1, iOS 10.3.2, iOS 10.3.3
Джейлбрейк поддерживает следующие 64-битные устройства:
- iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone SE, iPhone 5s
- iPad Air 2, iPad Air, iPad 5 поколения, iPad mini 4, iPad mini 3, iPad mini 2
- iPod touch 6 поколения
Он НЕ поддерживает iPhone 7 и iPhone 7 Plus, поскольку они несовместимы с техникой обхода KPP Луки Тодеско.
Это полу-привязанный джейлбрейк, как и LiberiOS.
Перед установкой джейлбрейка сохраните резервную копию своего устройства через iTunes.
Зарядите устройство так, чтобы заряда батареи хватило на процесс установки.

Предупреждение :

Шаг 1: Скачайте джейлбрейк G 0 blin и Cydia Impactor

Последнюю доступную версию IPA-файла G0blin можно скачать с официального сайта , а программу Cydia Impactor отсюда . Cydia Impactor доступна для macOS, Windows, Linux (32 и 64 бита).

Не скачивайте джейлбрейк G0blin с других сайтов , они могут содержать вирусы .

Шаг 2: Загрузите IPA -файл G 0 blin на устройство

Подсоедините свой iPhone, iPad или iPod touch к компьютеру с помощью кабеля Lightning.

Запустите Cydia Impactor. Программа должны обнаружить ваше устройство. Перетяните скачанный ранее IPA-файл джейлбрейка G0blin в окно программы. Введите свой Apple ID и пароль и подождите, пока завершится процесс загрузки.

Если в процессе возникнет ошибка «provision.cpp:168», почитайте нашу статью о том, как её исправить.

Шаг 3: Начните доверять профилю

Когда файл успешно загрузится, откройте Настройки и зайдите в Основные > Профили и управление устройством.

Нажмите на профиль с приложением G0blin и выберите Доверять.

Шаг 4: Запустите процесс джейлбрейка

Откройте приложение G0blin с домашнего экрана и нажмите кнопку Jailbroke Yo , чтобы начать установку.

Шаг 5: Подождите завершения

Спустя некоторое время должен появиться экран с сообщением о том, что джейлбрейк успешно установлен.

Поздравляем, вы это сделали!

Видеоинструкция

Как работает полу-привязанный джейлбрейк?

Каждый раз, когда ваше устройство перезагружается, джейлбрейк перестаёт действовать. Вы больше не сможете пользоваться установленными твиками. Чтобы установить джейлбрейк заново, просто откройте приложение G0blin и проделайте описанный выше процесс заново.

Когда истекает срок G 0 blin и как его обновить?

Если вы установили джейлбрейк G0blin через бесплатный Apple ID, его срок истечёт спустя 7 дней. Вам придётся заново загружать файл через Cydia Impactor каждую неделю. Процесс будет таким же. Приложение G0blin вам нужно только для того, чтобы заново устанавливать джейлбрейк после перезагрузки устройства, а истечение срока никак на него не повлияет.

В отличие от джейлбрейка Meridian, Goblin поддерживает Cydia и Cydia Substrate, так что вы сможете легко устанавливать твики. Список совместимых твиков вы найдёте .

Following Jailbreak solutions available for iOS 10.3.3. Almost all jailbreak tools install Cydia. Now you can with OTA blobs without SHSH.

In addition, iOS 10.3.4 available for the cellular version of the iPad 4 and the iPhone 5 with security updates & fix the GPS bug.

Tihmstar recently released H3lix jailbreak tool version named as DoubleH3lix jailbreak with siguza. It supported to jailbreak all the 64-bit devices running iOS 10 versions up to 10.3.3 version as Semi-untethered.

PsychoTea, known as Sparkey (@iBSparkes on Twitter) has released Meridian jailbreak for iOS 10.3.3 running 64-bit devices.

g0blin is semi-untethered jailbreak tool for iOS 10.3.3 running 64-bit devices. g0blin also support to iOS 10.3, iOS 10.3.1 and iOS 10.3.2 jailbreak.

Velonzy is a jailbreak app installer for iOS 10.3.3 to versions. Both online and Windows/Mac computer based method available to download velonzy.

H3lix released as semi-untethered jailbreak for iOS 10.3.3 running all 32-bit devices. This is supported to jailbreak all the iOS 10 versions too.

Other than the above solutions, some few jailbreak solutions available for iOS 10.3.3 under the .

1) Anzhuang

Step guide

Step 01 – Install zJailbreak or Xabsi from the above buttons. You just need to enter your device passcode during the installation process of zJailbreak or Xabsi.

Step 02 – Open the installed App store (zJailbreak or Xabsi). Install Anzhuang which is available in jailbreak category.

Step 03 – Now click “Browse the Jailbreak app list” to select an iOS 10.3.3 Jailbreak App.

Step 04 – OK, Select the Jailbreak app from list, tap the generate code, Then copy the code.

Step 05 – Open Anzhuang and paste the code. App will download automatically.

How to Trust the Application

When you open Enterprise App first time, you will receive the message to trust it. Follow the given below instructions to trust the application.

Step 01 – Dismiss the Untrusted Enterprise Developer popup message.

Step 02 – Go to Settings > General > Profile and Device management.

Step 03 – Trust the app.

2) DoubleH3lix Jailbreak

Tihmstar recently released DoubleH3lix jailbreak tool to jailbreak 64-bit devices running all the iOS 10 versions up to iOS 10.3.3 as Semi-untethered. Previously, tihmstar released H3lix jailbreak supported only for 32-bit devices. Both tihmstar’s H3lix jailbreak based on Siguza’s v0rtex exploit.

Before start the iOS 10.3.3 jailbreak, follow the below instructions.Prerequisites:

Backup all your data to iTunes or iCloud before the jailbreak.
Turn off Find my iPhone during the jailbreak process.
Turn off passcode/Touch ID while the jailbreak process.

Step Guide of DoubleH3lix jailbreak

Step 01 – Download the DoubleH3lix IPA and Cydia impactor using following buttons. Make sure to download Cydia Impactor according to your Computer OS.

Step 02 – Connect your iOS 10.3.3 device to the computer. Open the Cydia Impactor. Select your device from the drop-down menu.

Step 03 – Drag the DoubleH3lix IPA into the Cydia Impactor tool.

Step 04 – Now enter your Apple ID & password. Then, it will start to install DoubleH3lix app on your device.

Step 05 – Once the installation is done, DoubleH3lix app will be available on your device homescreen. Before open the app you need to trust the developer profile. General - > Settings - > Profiles & Device Management - > Trust the Enterprise App.

Step 06 – Now go back to homescreen and open the h3lix app. Then tap on “Jailbreak” Button.

Step 07 – Wait until complete the jailbreak process. Finally, it will install Cydia on your iOS 10.3.3 device.

Note – Because of DoubleH3lix tool is a Semi-untethered tool, you have to re-jailbreak your device after every reboot.

3) Meridian jailbreak

Requirements before start jailbreak

g0blin is still not stable, so we recommended to backup before starting the jailbreak.

Compatible devices for g0blin

iPhone 5S /iPhone 6/6 Plus /iPhone 6S/6S Plus /iPhone SE.

iPad Mini 3 /iPad Mini 4 /iPad Air 2 /iPad Pro 12.9-inch 1st generation (only iOS 10.3.3)

Step Guide to install g0blin iOS 10.3.3 – iOS 10.3 Jailbreak

Step 01 – Download g0blin jailbreak IPA.

Step 02 – Download Cydia impactor.

Step 03 – Connect your iOS device to Computer.

Step 04 – Launch Cydia Impactor and drag and drop g0blin jailbreak IPA to Cydia Impactor to start sideloading.

Step 05 – Cydia Impactor now requires your Apple ID details and submit the details.

Step 06 – Wait for sideloading complete and once complete it you will have g0blin app on your device home screen.

Step 07 – Now you can disconnect the device from the computer.

Step 08 – You cannot launch the app until trust the ap. Go to Settings > General > Profiles & Device Management and trust the app.

Step 09 – Launch the g0blin app and tap jailbreak button.

Step 10 – Wait for the already jailbroken message.

Step 11 – Now you should see Cydia on your homescreen.

Note – You should use g0blin jailbreak respring instead of Cydia respring.

5) Velonzy

Velonzy is a new method to install Jailbreak apps for iOS 10.3.3. Velonzy makes you as a virtual Apple developer and allows you to install the Jailbreak apps to your iOS 10.3.3 device very easily.

Velonzy is a donateware. Normally, you must donate to the Velonzy team to get their service. However, Pangu8 team donated them and they provide free service to install Velonzy to your iOS 10.3.3 devices. It is available two methods as follow to install Velonzy. Recommend to use both methods to install more apps to your device.

Velonzy Online method

Step 02 – Connect your device to your computer.Download the IPA file which signed from your UDID code.

Step 03 – Click the Cydia Impactor button of the Pangu8 Jailbreak installer.

Step 04 – Then Drag and drop the downloaded IPA file of the Jailbreak app.

Step 05 – Now you must Login to the Cydia Impactor using Your iTunes account. It is better if you can create a separate iTunes account to install Jailbreak apps to iOS 10.3.3.

(You have to log out from your default iTunes account and log in the new account when you installing the Jailbreak apps).

Step 06 – It takes about a minute to install Jailbreak app to your device.

Step 07 – OK, Now go to Settings, General and Profile and Device Management on your iTunes account.

Then you can see your iTunes account ID as the developer of this iOS 10.3.3 Jailbreak app.

Sign and Download IPAs of JB apps.

We have categorized some most popular Jailbreak applications of this page.

please Note – You must sign these IPA’s from your UDID code before downloading them. You can only install Jailbreak apps for iOS 10.3.3 developer beta version only.

First of all, You must get your UDID code.

01 – Connect your device to the computer.

02 – Now open iTunes and click twice as image shown.

03 – Then Copy the UDID code.

Jailbreak Scams

Spring Jailbreak

iOS Security Researcher & Cydia developer, DevelopApple has released Spring jailbreak for all the 64-bit devices running iOS 10.3 to iOS 10.3.3 versions. Method was found using Siguza’s v0rtex exploit, qwertyuiop’s yalu102 kpp bypass and the Xerub’s patchfinder. According to the developer, it can jailbreak all the A7 to A9 devices using the latest Spring beta 2 IPA to install Cydia. However, there was nothing to install.

Compatible devices –

All the A7 to A9 devices (64-bit devices only)

iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone SE

iPad (5th generation), iPad Pro (12.9-inch), iPad Pro (9.7-inch)

iPad Air, iPad Air 2, iPad mini 4, iPad mini 3, iPad mini 2

iPod touch (6th generation)

Compatible Versions

iOS 10.3.3, iOS 10.3.2, iOS 10.3.1, iOS 10.3

Note – We tested Spring jailbreak using above few devices running iOS 10.3.3 and iOS 10.3.1 versions. Jailbreak process failed for almost all tested devices. Here is the tested step guide. However, we highly recommended not to use below guide. Because Spring Jailbreak is totally fake.

Step Guide of Spring Jailbreak

Step 01 – Download Spring IPA using following button.

Jailbreak iOS 11.2.5

Apple released iOS 11.2.5 version after testing & developing it through 7 beta versions. Electra & Unc0ver Jailbreak available for iOS 11.2.5. Also, It has two jailbreak app installer method for this version. One is Anzhuang app installer. Other is Velonzy app installer. Both of these methods allow to install version.

Houdini Semi Jailbreak

Houdini, Semi Jailbreak method has been released for iOS 11.1.2 to iOS 11 and iOS 10.3.2 to 10. You can install the using Cydia impactor or zJailbreak online app store. Houdini allows you to install Jailbreak themes and tweaks for your iPhone or iPad. Houdini Tool recently upgraded by releasing Houdini beta 3 for to iOS 11.2.

Saigon Jailbreak

Extra_recipe+yaluX

Luca Todesco released extra_recipe+yaluX for So download extra_recipe+yaluX and get the stable jailbreak for your iPhone 7 / 7+ devices. Visit Yalu jailbreak page for download Yalu new method.

zJailbreak

zJailbreak is the alternative jailbreak solution for all latest iOS versions. Also, zJailbreak is a must have application for latest iOS releases because of several reasons. Now you can install with us or zJailbreak official page.

Для создания джейлбрейка. Теперь поддерживается iOS 10.2, но далеко не всеми устройствами - Yalu102 работает с iPhone 6s, iPhone 6s Plus, iPhone SE и iPad Pro.

Как ожидалось, большинство твиков, совместимых с iOS 10.1.1, работает и с iOS 10.2.

Что делать нужно

Внимание : все действия, описанные в статье, вы выполняете на свой страх и риск.

Шаг 1 . Загружаем последнюю версию iTunes .

Шаг 2 . Создаём резервную копию устройства. Это необходимо на случай, если что-нибудь пойдёт не так.

Шаг 3 . Загружаем IPA-файл джейлбрейк-утилиты Yalu102 [Скачать ] и Cydia Impactor [Скачать ].

Шаг 4 . Открываем Cydia Impactor, выбираем подключенное устройство, на которое хотим установить джейлбрейк.

Шаг 5 . Переносим IPA-файл yalu102 в окно Cydia Impactor.

Шаг 7 . Ждём, пока программа загрузит необходимое ПО на ваше устройство.

Не грусти, почти закончили

Шаг 8 . Открываем на iPhone или iPad Настройки –> Основные –> Управление устройством . Выбираем сертификат разработчика и два раза нажимаем Доверять .

Шаг 9 . Переходим на рабочий стол, тапаем по иконке Yalu102. Появится предупреждение, что место почти закончилось - это нормально .

После всех манипуляций гаджет перезагрузится и на рабочем столе появится значок Cydia. Если с первого раза не вышло, запустите ещё раз Yalu102.

Поздравляем, вы кулхацкеры взломали iOS 10.2! Приятного пользования.

Поставьте оценку:

(Нет голосов)